Tools Needed:
Drill
Saw
Scissors
A tape measure
Supplies:
44 feet of PVC pipe (1” works great)
12 connectors –T shaped (1”)
4 connectors- elbow (1”)
Dozen golf balls
Nylon rope or clothesline, about 20 ‘ worth, Each team uses a separate color of ball. If you can’t find colored golf balls, buy some paint or even use differing colors of nylon rope
Make Hillbilly Golf ladder
Step oneUsing your saw cut PVC (6) three foot long, (12) eighteen inches, (8) twelve inches. Gather all pieces of PVC and the connectors you purchased.
Step two Assembly
Put together 2 legs of the ladder by attaching three of the 18 inch leg pieces
together with a Tee connector. Once done it will look like a T. You will do this twice to make 2 sets.
Step three
Attach a Tee connector at the top of each leg and connect them with a 3 foot piece of PVC.
Attach 12 inch section of PVC on the top T connector to make the next
step. Place another T connector on top of the 12 inch PVC. Insert a 3
foot piece between the two legs.
Next we will add one more 12 inch PVC on the top to make our top ladder step.
Step five
You should have one 3 foot section of PVC left. Add both elbow connectors to both ends. These are now the top of the ladder!
You have now created the Hillbilly Golf ladder!
To make your Hillbilly Bolos
Step oneCarefully drill a hole through the middle of each golf ball
Step Two
Thread nylon rope through the golf ball and tie a knot on on both sides of the ball.
Tie another golf ball (don’t forget to use the same color!) onto the other end. You want 12 inches between golf balls and again you want to tie a knot on both sides of the ball.
Step Four
Make two sets of three bolos using different colors for each set (one set of three red, one set blue). You can make as many sets as you like.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.